Shantou Boting Electronic Co., Ltd.
Main products:Varistor,Mobile Power,Sensor,Capacitor,Thermistor
Products
Contact Us
  • Contact Person : Ms. ZHANG DAN
  • Company Name : Shantou Boting Electronic Co., Ltd.
  • Tel : 86-754-83657159
  • Fax : 86-754-83657159
  • Address : Guangdong,shantou,No.19 Building liri west zone,longhu District
  • Country/Region : China
  • Zip : 515041

Metal type temperature ntc sensor 100k

Metal type temperature ntc sensor 100k
Product Detailed
Metal type temperature ntc sensor 100k 1.Mainly apply to atmosphere condition such as airconditionings 2.High stablity

Metal type temperature ntc sensor 100k 

1 .Common Parameters                                 

   ( 1 ) Size(mm) 

(2)Materials1.Chip : MF58 Type Thermistor

2.Chip packaging materials:Glass.

3.Down-lead:Tinned Electron Wire.

4.Encapsulation material:Fire-proof Epoxy Resin.

5.Filling material: Fire-proof Epoxy Resin .

6. Shell Φ4*30, Nickel-plated copper . 

7.Down-lead: Cable UL2468#26 AWG*2C AS , Color:Black

 2. Parameters of Technology

 1.Zero Power Resistance at 25°C:100KΩ± 1%

 2.B Value: B25/50°C  3950±1%

 3.Thermal Time Constant(S): Max 60sec ( In the air in the 25 °C / 50 °C)

 4.hermal Dissipation Constant(mW/°C): Min 2.0mW/°C(In the air)

 5.Operating Temperature(°C): -20~200°C

3.Terms and General Characteristics

Terms

Description

Requirement

Zero Power Resistance

 

At 25°C, the measured resistance value can be neglected compared to the general tolerance when the change of the resistance is made  through its self-heat of the resistor.

 

See Electrical Parameters

B-value

    T1*T2         R1

B=          * ln (        )  

    T2   T1       R2

The B value can be calculated using the zero power resistance value at 25°C and 50°C. The equation is as above.

See Electrical Parameters

 

Thermal Dissipation Constant

The ratio of the change of the dissipation power to the corresponding change of the temperature at specified temperature. The unit is: mw/°C

See Electrical Parameters

 

 

ThermalTimeConstant

 

Under zero power condition, thermal time constant is the time required by a thermistor that its body temperature reach 63.2% of the difference between its initial and final temperature.

See Electrical Parameters

Operating Temperature

Allowable temperature range while the thermistor work continuously for long time

-40-+125°C

 

Damp Heat

The sample should be subjected to 40±2°C, relative humidity 93±3% for 48±2 hours, then stored at room temperature and humidity

for 1 hour.

No visible damage,themark is clear ,no

No visible damage,themark is clear,nobreakdown or arcing.Insulating resistance is>100MΩ. The change ratio of the resistance is within ±15%.

Withstand Voltage

Applied AC voltage of 700v between the lead of the resistor and the insulating coating for 1 minute

No breakdown

or arcing

 

Resistance to Soldering Heat

Immerse the lead of the resistor into tin liquor of 250±10°C for 3 sec, the distance from the liquor surface to the resistor is 6mm. Then resume to the original state.

No visible damage. The max change ratio of the resistance is within±15%

Solderability

 

Immerse the lead into tin liquor of 250±10°C for 3 sec. The temperature of immerse welding: 240±5°C, The temperature of hand welding: 260±5°C(5s)

The covered surface area should be above 95%

Bending Strength of Terminals

Fix the resistor, hanging a force of 0.5kg to one terminal to bend it by 90 degree, then resume to the original state, bend it by 90 degree again.

NO visible damage

 

Vibration

Frequency: 10-50HZ,Wave Amplitude:1.55mm.Direction and Time: 2 hours respectively for X,Y and Z axis.

No mechanical damage

Temperature Rapid Change

-40°C/30    25°C/5     +160°C/30     25°C/5

The change ratio of the resistance is±20%

Storage temp.

-40°C to 125°C

The change ratio of the resistance is±20%

Metal type temperature ntc sensor 100k



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.